Cleeven was built based on 2 strongly held convictions:

We are convinced that the excellence of European engineers will enable Europe to develop its leadership position in terms of Technological Innovation and R & D.

As engineers, we actively work alongside our customers to ensure their global competitiveness.

The high level of our technical expertise, skills, and the human and customer relations qualities of our Consultants enable our customers to carry out their projects.

The stake involved for us is simple: to provide the best human and technological skills within optimal timeframes.

We all have a duty in terms of retaining awareness. We must harness our human and intellectual potential in order to contribute to a better world.

After a very selective recruiting process, we support our Consultants via a staff development programme. This programme is aimed at making our Consultants aware of their potential, and helps them to develop it. We are strongly determined to contribute to increasing the communications and customer relations capacities of everyone around us.

We have set our sights high: It is our "Human Mission", or in other words, to raise the level of awareness of those in our inner circle. This is not necessarily as easy as it looks...

Convictions... Energy... Talents... Skills... Duties... Motivations... the Human touch!
That interests me
Cleeven contributes to the global competitiveness of its customers by intervening on 3 levels:

- Innovation - Patents
- R & D/Design Departments
- Operational excellence
100% involvement
100% technology
100% Staff Development
100% Innovation
100% Human Touch

Our MISSION

"To contribute to increasing our level of self-awareness and the awareness of those around us"

INTEGRITY

  • Being honest (with yourself and others)
  • Always having good intentions
  • Remaining impartial and reasoning objectively
  • Remembering where you come from

DUTY

  • Accepting that everything depends on you
  • Recognizing and accepting responsibility for your mistakes
  • Analysing your failures and success
  • Acting as an example to others

ACHIEVEMENT

  • Knowing yourself
  • Calling your beliefs into question
  • Identifying what drives you and harness it
  • Getting beyond your Ego
  • Exceeding your limits

COURAGE

  • Doing what is right
  • Deciding
  • Putting your thoughts into action
  • Being self-affirming and affirming to others
  • Taking measured risks

Filter by Sector/Field

As a Qualification/Validation Engineer integrated into a Project team, you will be responsible for Qualification & Validation and in this capacity you will carry out the following:

  • Qualification & Validation of equipment and utilities
  • Risk analysis
  • Drawing up test protocols, change control and validation reports
  • Carrying out DQ, IQ, OQ, PQ, FAT and SAT tests
  • GMP and FDA compliance
  • Interfacing with suppliers and/or customers

With 5 years of tertiary study completed in a major engineering school, majoring in process engineering, automation, mechanical engineering, or an equivalent subject, you have obtained significant experience over at least 1 year in the pharmaceuticals industry in the area of Qualification & Validation.

Mastery of English is required for this position. German is an added advantage.

I will send my CV

As an Automation Project Management Engineer within the Automation Department, you will be in charge of Automation Project Management. In this capacity, you will ensure the following:

  • Fulfilment of Costs, Deadlines and Quality
  • The success of Projects: Upgrades, Revamping, New Works, Implementation, and Standardization
  • Drawing up and/or reviewing Specifications
  • URS (User Requirements Specifications)
  • HDS (Hardware Design Specifications)
  • SDS (Software Design Specifications)
  • Programming and validation
  • Installation and training users
  • GAMP, 21 CFR part 11, and BPx compliance
  • Interfacing with the actors involved in the Project

With 5 years of tertiary study completed in a major engineering school, majoring in automation, industrial IT or an equivalent subject, you have obtained significant experience over more than 3 years in the pharmaceuticals industry in the area of automation.

I will send my CV

As an Automation Engineer within the Automation Department, you are responsible for programming automatic controllers. Your role will be:

  • Programming automatic controllers, supervisors, and maintenance of them
  • Diagnostics and troubleshooting
  • Development support
  • GAMP, 21 CFR part 11, and BPx compliance

With 5 years of tertiary study completed in a major engineering school, majoring in automation, you have obtained significant experience over at least 1 year in the pharmaceuticals industry sector in the area of Automatic Control Systems running one or more of the following systems: Siemens, Allen Bradley, Honeywell, RSlogix, deltaV, Historian, etc.

I will send my CV

As a Process Engineer seconded to a project team, you will participate in developing Processes. Your role will be to carry out and contribute to:

  • Feasibility studies
  • Designing processes and utilities
  • Conceptual Design
  • Basic Design
  • Detailed Design
  • Drawing up URS specifications
  • Drawing up PFD and PID diagrams
  • GMP compliance

With 5 years of tertiary study completed in a major engineering school, majoring in Process Engineering, Chemical Engineering, Biotechnologies or an equivalent subject, you have obtained significant experience over at least 2 years in the pharmaceuticals industry sector in the area of Process Engineering.

I will send my CV

As a Computer System Validation Engineer integrated into a Project team, you will be responsible for the validation of computerized and automated systems and in this capacity you will carry out the following:

  • Validation of automatic controllers, supervisors, and MES (Manufacturing Execution Systems)
  • Functional analyses
  • Drawing up test protocols, change control and validation reports
  • Carrying out DQ, IQ, OQ, PQ, FAT and SAT tests
  • GAMP, 21 CFR part 11, and BPx compliance
  • Interfacing with suppliers and/or customers

With 5 years of tertiary study completed in a major engineering school, majoring in automation, industrial IT or an equivalent subject, you have obtained significant experience over at least 1 year in the pharmaceuticals industry sector in the area of CSV in relation to Siemens, Allen Bradley, deltaV, Honeywell, RsLogix, Historian, and other technologies.

I will send my CV

As an Electrical Engineer integrated into a project team, you are responsible for carrying out electrical studies. You have training as an engineer or 5 years or more of tertiary study and, in this capacity, you will carry out:

  • Management of electrical studies
  • Completion of electrical files (diagrams, technical documents, etc.)
  • Specifications for electrical equipment
  • Electrical tests campaign management
  • Monitoring of suppliers
  • Worksite management
  • Execution monitoring

With 5 years of tertiary study completed in a major engineering school (such as the École Centrale, École des Mines, INSA, ENSAM, ICAM etc.), majoring in Electrical Engineering, you have obtained significant experience over at least 3 years working for a business in the industrial sector.

Mastery of English is required for this position.

I will send my CV

As an Electrical Design Engineer, you will work in a design department: You will be integrated into a project team within the Design Department. In particular, you will work on issues relating to designs, sizing equipment, as well as on technical specifications.

You are a graduate from an engineering school specializing in electrical engineering, and you have completed significant internships enabling you to ramp up your skills very quickly.
Mastery of Caneco, Dialux or See Electrical is an advantage.

I will send my CV

As an Electrical Engineer seconded to the Industrial Engineering Centre, you will be responsible for missions relating to project management, design and execution monitoring of electrical works.

You will carry out the following missions:

  • In terms of design: Inventories, diagnostics, and feasibility studies through to the contractors’ tendering file
  • In terms of monitoring the execution of works: Signing off execution studies, management of works execution, and operations prior to acceptance
  • You will be able to handle being assigned to manage a team of Engineers and Design Technicians
  • At your level, you will maintain technical relations with your customers and you will be attentive to their needs

A trained engineer (either an electrical engineer or a general engineer specializing in electrical engineering) with at least 2 years of experience, you have a good knowledge of high and low voltage electricity, standards, and electrical design software (Caneco, AutoCAD, etc.).
Fluent English (occasional trips 4-5 times a year)

I will send my CV

As an Engineering Project Manager seconded to our customer’s Engineering Division Directorate, you will be in charge of fulfilling objectives concerning deadlines, quality and costs in relation to a portfolio of industrial projects.
You will ensure project management for the following:

  • Organization of the activity
  • Co-ordinating meetings
  • Managing corrective actions
  • Setting up and monitoring project indicators

You are the customer’s priority interface: presentations, taking part in the PDR review, CDR review, etc
You will also contribute to sales operations: responding to calls for tenders, presentations, and claims management.
Bolstered by your experience, you will contribute your knowledge about the technical fields involved in the project (Design and Calculation). You will regularly report to your line management as well as to the customer concerned by the project.

With 5 years of engineering tertiary training, you have significant experience involving at least 7 years in relation to engineering projects in the aerospace sector involving managing projects and teams of 10 to 20 people.
You have skills in risk management, keeping to a budget, and contract management.
You have a good level of technical English.
You are good at human contacts, have leadership skills and can handle responsibilities.

I will send my CV

As a Methods Engineer, you will work in the Methods Department of one of our customers in the automotive sector and you will be in charge of:

  • Analysing, understanding and drawing up technical documents for specialized machinery for manufacturing aircraft tyres, heavy goods vehicles, etc. (instructions concerning assembly, installation, maintenance, use, adjustments, etc.)
  • Creating and updating the technical database and implementing ongoing improvements of procedures.
  • Interfacing between the worksite, the Design Department, Quality, and Purchasing during the technical proposal, execution and assembly phases.
  • The acceptance process and dealing with non-compliance.
  • Providing quality support for suppliers.
  • Providing technical support during installation of machines on the customer’s site.

With 5 years of mechanical engineering tertiary training, you have initial experience in design and/or methods in the field of special machinery.
Mastery of CAD/CAM design software such as Solidworks is an advantage.

I will send my CV

As an Engineering Project Manager seconded to the Planning Director, you are the Project Manager in charge of developing a set of plastic parts. In this capacity, your responsibilities are as follows:

  • Co-ordination of a multi-disciplinary team consisting of design technicians and engineers (CATIA volume and surface environment), engineers specializing in quality, tests, and validations, and experts in tooling & injection-moulding, etc.
  • Quality: Compliance of the development process, validation of milestones, PPAP files, etc.
  • Costs: Management of study hours, and the prices for purchased developments (parts or toolings)
  • Deadlines: Consolidation of the schedule of your teams and communication with management
  • Co-development with the other trades involved in the program: purchasing, quality, industrial implementation, commerce

Above all, it will be your analysis and synthesis skills which will make a difference within a technical environment that is strongly oriented towards plastics processing.
With 5 years of mechanical engineering or plastics processing tertiary training (at a leading engineering school or in a university or equivalent syllabus), you will have at least 5 years of successful experience in an automotive parts environment in relation to motor vehicles or trucks (or real expertise in plastic injection moulding in a highly demanding environment in relation to appearance, performance, geometry, etc).

You stand out due to your ability to integrate into a team and operate on a stand-alone basis in terms of technical issues. Full mastery of English is required for this position.

I will send my CV

As a Methods Engineer, you will work in an Engineering team in order to support our customer with putting a new product into production. You will be in charge of:

  • Checking the technical specifications upon acceptance of the machinery
  • Interfacing with the automatic control systems and electrical departments
  • Supporting on-site installation with the Engineering team
  • Providing feedback on problems and explaining them
  • Taking part in meetings with suppliers
  • Taking part in operational start-up, and tests

Being a trained mechanical engineer, you have initial Engineering experience in a department working in an industrial environment (long-term internship approved).

You are dynamic, motivated by operations out in the field, and you like solving concrete problems. You are recognised as a self-starter and for your ability to communicate.
Good document drafting skills are essential for this position.

I will send my CV

As a Mechanical Design Engineer, you are in charge of:

  • Analysing specifications
  • Managing interfaces with the various disciplines (mechanical engineering, electrical engineering, instrumentation, civil engineering, etc.)
  • Designing and drawing up equipment technical specifications
  • The tendering process for suppliers, and analysis and clarification of their tenders
  • Reviewing & validating detailed designs after the order has been placed
  • Monitoring suppliers
  • Managing technical documents
  • Drawing up installation procedures and monitoring them

Being a trained mechanical engineer, you have initial mechanical engineering experience working in an industrial environment (internship approved).

You are curious, dynamic, and have strong leadership skills and the ability to work independently, in addition to which you have good communication skills and are ready to devote yourself to a new adventure.
Mastery of English is required for this position.

I will send my CV

As an Engineer with Electrotechnical or Mechanical Design training, you are in charge of the design, and developing cabling (passenger compartment, engine), for prototype vehicles in accordance with professional standards and the business rules set by the manufacturer.

Your mission will be:

  • Designing mechanical parts and cable paths
  • Studies and execution of cable paths in a CATIA V5 EHI environment
  • Generating 2D cabling drawings in an AutoCAD environment
  • Digitization review and archiving of digitization in databases
  • Taking part in meetings and exchanging e-mails in an international environment (in English)

The design activities are carried out in the Design Department
Knowledge of the automotive sector and a strong interest in it
Keeping to schedules and fulfilling commitments (automotive environment)
We are recruiting Engineers who want to discover the field of automotive cabling.

I will send my CV

As a Packaging Engineer seconded to the Project Manager and working in close collaboration with the Design, Quality and Production teams, you will have to intervene in relation to activities concerning Packaging, mechanical analysis and thermal analysis. In particular, you will be in charge of the following tasks:

  • Designing the packaging physical architecture
  • Implementing board interfaces
  • Board thermal and mechanical analyses
  • Drawing up equipment definition files

With 5 years of tertiary training oriented towards Mechanical Engineering or Electronics, you have major experience in Engineering relating to electronic boxes and packaging (minimum of 5 years).
You come up with proposals, and combine rigorousness, independence and motivation.
You are open and know how to work in a team on complex projects involving multiple trades.

I will send my CV

As an experienced IT Project Manager in the Studies Department, you will have the following main responsibilities:

  • Managing teams and managing major new projects, from pre-sales activity through to deployment,
  • Contributing to responding to calls for tenders,
  • Gathering and analysing customers’ needs,
  • Guaranteeing compliance of the loads, costs, scheduling and quality of deliverables,
  • Ensuring effective risk management,
  • Co-ordinating project-related bodies,
  • Ensuring reporting, and communicating about your activities,
  • Managing relations with internal or external actors,
  • Promoting and supporting change management,
  • Participating in the quality improvement approach,
  • Carrying out functional and technology monitoring.

With training as an Engineer, ideally in IT, you will have at least 3 years of experience in managing IT projects in Web, mobile and IS environments.
Ideally, you will know V-Model methodologies.
Knowledge of the pharmaceutical and medical fields would be appreciated.

I will send my CV

Software Development Engineerseconded to the Software R&D Manager, you will:

  • Analyse the standards specific to the sector, which you will transform into series of tests,
  • Develop and test our qualification solutions,
  • Guarantee the quality of the developments,
  • Intervene in high-level support,
  • Take part in standards committees.

You are a graduate from an Engineering School and have at least 2 years of professional experience. You have acquired substantial skills in the following fields: algorithms, C#, Visual Studio and program tests.
You have both a passion for software development and a respect for customers’ constraints.
The advantages you offer for succeeding in your mission are that you are a self-starter, you come up with proposals, and you have an inquiring mind.

I will send my CV

As an IT Engineer integrated into the IT Department of a customer in the medical sector and subordinate to a Project Manager, you will carry out all of the stages involved in developing computer software (design and analysis, architecture, coding, the acceptance procedure, tests and retro-tests, deployment, training, documentation, monitoring/assessment, and upgrades).
Ideally, you know the technical tools and programming languages used:

  • Web development: ASP.NET / JavaScript / JQuery / HTML / CSS
  • Object-oriented development: VB.NET
  • SQL: SQL Server
  • Development tools: Visual Studio, Visual SourceSafe
  • OS: WINDOWS
  • Methodologies: UML

Having completed training at an IT engineering school, you have an inquiring mind with a predilection for the technical dimension. You have good contacts with end users, and have developed a capacity to list and synthesize, as well as having independent work habits.
You are rigorous and methodical, and are particularly mindful of quality procedures and service standards within the unit and, more generally speaking, within the department where you work.
Mastery of German is required for this position.

I will send my CV

As a Power Electronics Engineer in the Electronics, Avionics and Optronics Development Department in the Defence sector, you are responsible for designing electronic sub-assemblies that comply with the specifications drawn up in collaboration with the product architecture teams in accordance with the business methodologies and processes in force within the Product Division’s Centre of Excellence.
You are responsible for the following activities related to the development of an electronic sub-assembly:

  • Participating in activities for defining product architecture (in support of the product engineer and the architects)
  • Drawing up the related traceability and specifications in light of the product architecture documents and specifications.
  • Defining the board architecture (defining the sizing design choices and sub-functions)
  • Ensuring a design with an objective cost in liaison with the industrial implementation teams and which fulfils the testability and producibility needs defined
  • Specifying the placement/routing constraints and ensuring monitoring of them
  • Preparing and then carrying out development tests and then formal verification tests for the board
  • Establishing the compliance status of the completed design. Correcting deviations noted to the product engineer or having their acceptability established

You have engineering training or a thesis in Electronics and have skills in analogue and power electronics. You are familiar with aerospace standards. The Defence/Arms Sector does not pose any problems for you.
You have:

  • The capacity to innovate
  • Analysis and synthesis capabilities
  • The capacity to adapt
  • You are organized and rigorous
  • You are dynamic, committed and results-orientedThe capacity to innovate

I will send my CV

As an Analogue Electronics Engineer, under the framework of a project on the premises of a top-level equipment manufacturer, we are recruiting an Analogue Electronics Engineer (M/F). Within this context, you will participate in:

  • Design (drawing up specifications for boards, selecting components, design and entry of diagrams, monitoring routing locations, and launch monitoring)
  • Developing a Buck, Boost, or Flyback power supply
  • Documentation
  • Verification and validation of the software on the target

You have been trained as an Electronics Engineer and have at least 2 years of experience in the field of analogue electronic design.

I will send my CV

As a Power & Analogue Electronics Engineer under the framework of a project in the Defence/Aerospace sector, we are seeking an Engineer in the field of Power and Analogue Electronics development seconded to the Project Director. You will intervene on the design of converters with forward, flyback or shut-off switching converters. Your various tasks will be as follows:

  • Sizing several voltage converters depending on the specifications
  • Detailed design of these converters (identifying components and the preliminary diagram)
  • Managing the entry of the detailed diagram, and placement and routing of the board, taking the industrial constraints into account
  • Preparing for the prototypes test phases: drawing up the test procedure specification, and the test bench specification

You have been trained as an Electronics Engineer and have at least 2 years of experience in the field of power (supply) and analogue electronics, ideally in the aerospace sector.
You have mastery of simulation tools such as Simplis, Spice, MatCad, Symetrix, and PSIM.
English is essential. You are a self-starter when it comes to getting involved in a project requiring responsiveness.

I will send my CV

As a Telecommunications Engineer integrated into a project team, you ensure the “Quality of Services” of equipment, as well as of all the uses made of it (Voice, Data, SMS, MMS, Micropayments, Webservice, etc.) requiring INs. Your role is to:

  • Analyse and investigate using Protocols traces (Diameter, INAP, SS7, etc.) and/or via MML Cmd requests on the system
  • Carrying out the monitoring of VRS of new IN-side functionalities
  • Work in collaboration with the engineering support, project and parameterization teams

You have been trained as an Engineer or have 5 years of tertiary training in Telecommunications or Systems and Networks, and you have at least 2 years of experience in an equivalent position. You have substantial skills in terms of the UNIX environment and mobile network.
As a rigorous multi-tasker who is organized and responsive, you like working in a team. You also have good analysis and synthesis skills and are good at drawing up documents.

I will send my CV

As a Telecommunications Engineer, you are an Expert in signal processing; subordinate to the Technical Director, you will have to ensure:

  • That technical specifications for products are drawn up
  • Defining and implementing modulation/demodulation algorithms
  • Development of SDR (Software Defined Radio) software demodulation algorithms
  • The design of digitized signal transmission protocols
  • Verification and validation of firmware developments
  • Participation in porting to the DSP and/or uC real-time architecture
  • Validation of software and hardware items

You have been trained as an Engineer/Doctor in electronics or IT specializing in signal processing, and particularly in the field of telecommunications and software defined radio.

You have mastered the following skills:

  • Signal processing, and knowledge of the properties and special features of classic modulations/demodulations
  • Digital modulation/demodulation techniques
  • Digital spectral analysis
  • Baseband conversion, execution of digital oscillators
  • Channel filtering and multi-channelling
  • Correction codes
  • In-depth knowledge of DSP, FPGA and uC solutions

You have at least 5 years of experience in signal processing and particularly in the field of telecommunications.
Knowledge of onboard system architectures design and development of low-level communication protocols would be an advantage.

I will send my CV

As an Electrical Engineer integrated into a project team, you are responsible for carrying out electrical studies.
In this capacity, you will carry out the following:

  • Management of electrical studies
  • Completion of electrical files (diagrams, technical documents, etc.)
  • Specifications for electrical equipment
  • Electrical tests campaign management
  • Equipment validation
  • Monitoring of suppliers
  • Worksite management
  • Execution monitoring

With 5 years of tertiary study completed in a major engineering school (such as the École Centrale, École des Mines, INSA, ENSAM, ICAM etc.), majoring in Electrical Engineering, you have obtained significant experience over at least 1 years working for a business in the industrial sector.

I will send my CV

As an Automation Engineer seconded to the Special Machinery Design Department Manager, and liaising transversally with our customer’s various departments, you will take part in designing Special Machinery relating to every aspect of automatic control systems.
Your main missions will be:

  • Designing PID diagrams
  • Designing the automatic systems for our machinery, with the solutions used in the Design Department
  • Programming automatic controllers and project documentation
  • Monitoring and checks when starting up installations and equipment
  • Carrying out or supporting troubleshooting machinery breakdowns

You were trained in an Engineering School or University and have 5 years of tertiary training. You have substantial knowledge of automatic control systems and have at least 2 years of experience in similar positions, including operational missions.
You are a multi-tasker who enjoys working out in the field and you appreciate the operational aspects of your business.

I will send my CV

As an Automation Engineer within the Automation Department, you are responsible for programming automatic controllers. Your role will be:

  • Programming automatic controllers, supervisors, and maintenance of them
  • Diagnostics and troubleshooting
  • Development support
  • GAMP, 21 CFR part 11, and BPx compliance

With 5 years of tertiary study completed in a major engineering school, majoring in automation, you have obtained significant experience over at least 1 year in the pharmaceuticals industry sector in the area of Automatic Control Systems running one or more of the following systems: Siemens, Allen Bradley, Honeywell, RSlogix, deltaV, Historian, etc.

I will send my CV

As an Automation Project Management Engineer within the Automation Department, you will be in charge of Automation Project Management. In this capacity, you will ensure the following:

  • Fulfilment of Costs, Deadlines and Quality
  • The success of Projects: Upgrades, Revamping, New Works, Implementation, and Standardization
  • Drawing up and/or reviewing Specifications
  • URS (User Requirements Specifications)
  • HDS (Hardware Design Specifications)
  • SDS (Software Design Specifications)
  • Programming and validation
  • Installation and training users
  • GAMP, 21 CFR part 11, and BPx compliance
  • Interfacing with the actors involved in the Project

With 5 years of tertiary study completed in a major engineering school, majoring in automation, industrial IT or an equivalent subject, you have obtained significant experience over more than 3 years in the pharmaceuticals industry in the area of automation.

I will send my CV

CLEEVEN He

Luzern

SWITZERLAND

SWITZERLAND

Luzern

CLEEVEN He AG
Stadthofstrasse 3
6004 Luzern

E-mail: contact-he@cleeven.com
Phone: +41 (0)76 817 02 36

CLEEVEN Li

Lyon

FRANCE

FRANCE

Lyon

CLEEVEN Li
94 Quai Charles de Gaulle
CityOne Cité Internationale
69006 Lyon

E-mail: contact-Li@cleeven.com
Phone: +33 (0)4 72 69 03 34

CLEEVEN Ge

Grenoble

FRANCE

FRANCE

Grenoble

CLEEVEN Ge
Le Doyen
22 avenue Doyen Louis Weil
38000 Grenoble

E-mail: contact-ge@cleeven.com
Phone: +33 (0)7 76 70 28 42

CLEEVEN Se

Sophia Antipolis

FRANCE

FRANCE

Sophia Antipolis

CLEEVEN Se
Les Templiers
950 Route des Colles
06410 Sophia-Antipolis

E-mail: contact-se@cleeven.com
Phone: +33 (0)4 93 64 90 15

CLEEVEN Sc

Stockholm

SWEDEN

SWEDEN

Stockholm

CLEEVEN Sc
Vasagatan 7
111 20 Stockholm

Email: admin-sc@cleeven.com
Phone: +46 (0)76 898 40 25

CLEEVEN Nd

Lille

FRANCE

FRANCE

Lille

CLEEVEN Nd
Parc Joire
44 Avenue de la Marne
59290 Wasquehal

Email: contact-nd@cleeven.com
Phone: +33 (0)7 76 58 49 70

CLEEVEN Mo

Monaco

Monaco

Monaco

Monaco

CLEEVEN Mo
Villa Richmond,
22 Boulevard Princesse Charlotte
98000 Monte Carlo - Monaco

Email: admin-mo@cleeven.com
Phone: +33 (0)7 76 013 437
* Compulsory fields